Home/Browse All/CPSC-79011
CPSCGeneral Alert

Bench Grinders To Be Repaired

Published: March 9, 1979Recall ID: 79011Category: Consumer ProductsCountry: United States
US
Safety AlertCPSCUSUS

Bench Grinders To Be Repaired

Recalling Firm: McGraw Edison, Montgomery Ward

🌐
Translate NoticeTranslate notice text, hazard warnings, and descriptions into any supported language.

Product Description & Identification

March 9, 1979 Release # 79-011 Bench Grinders To Be Repaired WASHINGTON, D. C. (March 9) -- Montgomery Ward and Co., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced that it is continuing a voluntary repair program to correct a potential shock hazard in certain Wards' Powr-Kraft model TGB-5102A six-inch bench grinders. This additional notice of the voluntary repair program is being issued in hopes of receiving a better consumer response. The program was first announced by the manufacturer, McGraw-Edison Co., on August 29, 1978. A protective sleeve that insulates an electric lead wire may wear through on some units if in contact with the motor shaft. Severe shock could result if the bench grinder is not properly grounded and the user is grounded or is touching a grounded metal object such as a water pipe. The repair program applies only to Powr-Kraft model TGB-5102A grinders with a "77F" date code embossed on the nameplate and to certain units with the same model number that were purchased after June 1973, but show no date code. Units with the "77F" date code that bear an orange inspection sticker on either the unit or its packing carton have already been inspected and are not subject to this repair program. The grinder should not be used until it has been inspected and reworked. For instructions on having the units checked and repaired free-of-charge, owners of the grinders should write to: Bench Grinder Repair Program, C/O National Service Manager, Portable Appliance and Tool Group, McGraw-Edison Co., 2nd and Vine Sts., Boonville, MO. 65233. To verify the model number, consumers may contact CPSC's toll-free Hotline at 800/638-2772

Affected Products

Wards' Powr-Kraft six-inch bench grinders

Additional Source Details

FieldValue
U R Lhttps://www.cpsc.gov/Recalls/1979/Bench-Grinders-To-Be-Repaired
TitleBench Grinders To Be Repaired
Products › 1 › TypeSanders/Grinders & Accessories
Products › 1 › Category I D2110
Products › 2 › NameWards' Powr-Kraft six-inch bench grinders
Recall I D3965
Recall Date1979-03-09T00:00:00
DescriptionMarch 9, 1979 Release # 79-011 Bench Grinders To Be Repaired WASHINGTON, D. C. (March 9) -- Montgomery Ward and Co., in cooperation with the U.S. Consumer Product Safety Commission (CPSC), today announced that it is continuing a voluntary repair program to correct a potential shock hazard in certain Wards' Powr-Kraft model TGB-5102A six-inch bench grinders. This additional notice of the voluntary repair program is being issued in hopes of receiving a better consumer response. The program was first announced by the manufacturer, McGraw-Edison Co., on August 29, 1978. A protective sleeve that insulates an electric lead wire may wear through on some units if in contact with the motor shaft. Severe shock could result if the bench grinder is not properly grounded and the user is grounded or is touching a grounded metal object such as a water pipe. The repair program applies only to Powr-Kraft model TGB-5102A grinders with a "77F" date code embossed on the nameplate and to certain units with the same model number that were purchased after June 1973, but show no date code. Units with the "77F" date code that bear an orange inspection sticker on either the unit or its packing carton have already been inspected and are not subject to this repair program. The grinder should not be used until it has been inspected and reworked. For instructions on having the units checked and repaired free-of-charge, owners of the grinders should write to: Bench Grinder Repair Program, C/O National Service Manager, Portable Appliance and Tool Group, McGraw-Edison Co., 2nd and Vine Sts., Boonville, MO. 65233. To verify the model number, consumers may contact CPSC's toll-free Hotline at 800/638-2772
Recall Number79011
Manufacturers › 1 › NameMcGraw Edison
Manufacturers › 2 › NameMontgomery Ward
Last Publish Date2014-12-17T00:00:00

Consumer Action Protocol: What You Should Do Immediately

Safety Steps
1Verify Product Identifiers

Check the model number, serial number, and date stamp on the rating label on the back or underside of the product.

2Isolate & Discontinue Use

Immediately discontinue using the product. Unplug electrical items and keep juvenile items out of reach of children.

3Claim Free Statutory Remedy

Under statutory consumer protection rules, consumers are entitled to a full refund, certified replacement, or free repair kit without needing the original sales receipt.

4Report Adverse Incidents

If you suffered an injury, illness, or property damage from this product, file an official incident report with regulatory authorities (CPSC).

Your Legal Rights as a Consumer

Recalls are legally binding corrective safety actions overseen by statutory government bodies. Recalling entities are legally prohibited from charging consumers for official safety remedies. If a retailer or dealership refuses your recall remedy, notify the issuing regulatory agency immediately.

Frequently Asked Questions About This Recall

FAQ Guide

Q1:What should I do immediately if I own or bought Bench Grinders To Be Repaired?

Immediately stop using the product and keep it out of reach of children. Disconnect power if electrical, and do not attempt makeshift home repairs.

Q2:Can I get a full refund or free repair for this recall?

Yes. Recalling manufacturers and retail merchants are required under consumer protection regulations to offer a statutory remedy—typically a full refund, certified repair kit, or replacement unit.

Q3:Do I need my original sales receipt to claim a remedy or refund?

In most recall cases, no receipt is required. Because safety recalls are matters of public health and statutory compliance, retailers and manufacturers routinely issue refunds, store credit, or replacement kits upon presentation of the affected product or lot code.

Q4:Where can I verify official information for this safety alert?

This safety alert is aggregated directly from official regulatory agency records (CPSC). You can click the 'Official Agency Alert' link on this page to view the primary government notice and contact the manufacturer directly.

Check Other Products In Your Household

Free Safety Tools

Safety recalls are issued daily across foods, medications, vehicles, and electronics. Use our instant tools to check your home for active safety warnings:

Overview

  • Recalling FirmMcGraw Edison, Montgomery Ward
Recall Hazard Severity
Caution (Class III)
Official Agency Alert

📢 Share Warning

Alert family and friends to keep them safe. Copy this quick alert message:

🚨 SAFETY ALERT: McGraw Edison, Montgomery Ward - Bench Grinders To Be Repaired

Check if your household is affected:
https://therecallfile.com/recalls/bench-grinders-to-be-repaired/CPSC-79011
WhatsAppFacebook

Join Alertlist

Get instant email updates whenever critical safety recalls like this are published.

Support The Recall File

Help keep official recall alerts free, accessible, and fast for everyone.

Donate with PayPal

Supports USD, EUR, GBP, International Cards & PayPal

Spread the WordBench Grinders To Be Repaired

Install The Recall File App

Check safety warnings, scan your pantry, and monitor your vehicles directly from your home screen.