Home/Recalls/CPSC-06184
CPSCGeneral Alert

Safety Alert: Robert Bosch Tool Corp. Abrasive Cut-Off Wheels Lack Safety Warnin...

Published: June 9, 2006Recall ID: 06184Category: generalCountry: US

Reason for Recall / Hazard

The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. "! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."

Product Description & Identification

The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2" 1/8" 28027 7"-7-1/4" 1/8" 28028 8" 1/8" 28030 10" 1/8" 28032 12" 1/8" 28033 14" 1/8"

Affected Products

Vermont American® Abrasive Cut-Off Wheels

Additional Source Details

FieldValue
U R Lhttps://www.cpsc.gov/Recalls/2006/Safety-Alert-Robert-Bosch-Tool-Corp-Abrasive-Cut-Off-Wheels-Lack-Safety-Warning-Label
TitleSafety Alert: Robert Bosch Tool Corp. Abrasive Cut-Off Wheels Lack Safety Warning Label
Images › U R Lhttps://www.cpsc.gov/~/link/34380e3c24c14ed6ae1493551e794b43.jpg
Images › CaptionAbrasive Cut-Off Wheel
Hazards › NameThe Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. "! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."
Injuries › NameNone reported.
Products › NameVermont American® Abrasive Cut-Off Wheels
Products › TypeTools Miscellaneous
Products › Category I D2177
Products › Number Of UnitsAbout 400,000
Recall I D3292
Remedies › NameConsumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.
Retailers › NameIndustrial distributors nationwide from January 2001 through September 2005 for between $5 and $15.
Recall Date2006-06-09T00:00:00
DescriptionThe wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2" 1/8" 28027 7"-7-1/4" 1/8" 28028 8" 1/8" 28030 10" 1/8" 28032 12" 1/8" 28033 14" 1/8"
Recall Number06184
Manufacturers › NameRobert Bosch Tool Corp., Mt. Prospect, Ill.
Consumer ContactCall Robert Bosch Tool Corp. at (800) 742-3869 between 7 a.m. and 7 p.m. CT Monday thru Friday.
Last Publish Date2024-06-25T00:00:00
Manufacturer Countries › CountryCanada

Overview

  • Recalling FirmRobert Bosch Tool Corp., Mt. Prospect, Ill.
Official Agency Alert