Gorilla Inc. Recalls EXO-Tech Safety Harness Due to Fall Hazard
Reason for Recall / Hazard
The webbing of the waist belt on the safety harness is not routed through the lineman's loop located on the front of the harness near waist level. Since the loops are not properly anchored to the harness webbing but are attached only through stitching not intended to restrain a user during a fall, they that can pull away from the harness when force is applied, leaving the user unrestrained.
Product Description & Identification
This safety harness, used as a fall restraint for hunting, is comprised of two leg straps and two shoulder straps, which connect to a waist belt and padded back support. There is a long, black tether strap at the top rear of the safety harness, which has gray and red accents. The name EXO-Tech is located on the right front shoulder strap and the name Gorilla is located on the left front should strap both in white lettering. Similar to a shirt tag, there is a white manufacturing label on the inside of the back of the harness with the model number 45111 and manufacturing dates, 4/22/2009 or 6/26/2009. These are the only harnesses recalled.
Affected Products
EXO-Tech Safety Harness
Additional Source Details
| Field | Value |
|---|---|
| U R L | https://www.cpsc.gov/Recalls/2010/Gorilla-Inc-Recalls-EXO-Tech-Safety-Harness-Due-to-Fall-Hazard |
| Title | Gorilla Inc. Recalls EXO-Tech Safety Harness Due to Fall Hazard |
| Images › 1 › U R L | https://www.cpsc.gov/~/link/7184b25b1d654fb59f15c0970bc0c12f.jpg |
| Images › 1 › Caption | Picture of Recalled safety harness |
| Images › 2 › U R L | https://www.cpsc.gov/~/link/34c9a765a7684e6babd309e7a7c8f8c3.jpg |
| Images › 2 › Caption | Picture of Recalled safety harness and label location |
| Hazards › Name | The webbing of the waist belt on the safety harness is not routed through the lineman's loop located on the front of the harness near waist level. Since the loops are not properly anchored to the harness webbing but are attached only through stitching not intended to restrain a user during a fall, they that can pull away from the harness when force is applied, leaving the user unrestrained. |
| Injuries › Name | No incidents were reported. |
| Products › Name | EXO-Tech Safety Harness |
| Products › Type | Hunting Accessories |
| Products › Category I D | 2006 |
| Products › Number Of Units | About 90 |
| Recall I D | 42 |
| Remedies › Name | Consumers should immediately stop using the harness and contact Gorilla Inc. to receive a refund. |
| Retailers › Name | Cabelas, Bass Pro and at various sporting goods stores nationwide from May 2009 to August 2009 for about $200. |
| Recall Date | 2009-11-18T00:00:00 |
| Description | This safety harness, used as a fall restraint for hunting, is comprised of two leg straps and two shoulder straps, which connect to a waist belt and padded back support. There is a long, black tether strap at the top rear of the safety harness, which has gray and red accents. The name EXO-Tech is located on the right front shoulder strap and the name Gorilla is located on the left front should strap both in white lettering. Similar to a shirt tag, there is a white manufacturing label on the inside of the back of the harness with the model number 45111 and manufacturing dates, 4/22/2009 or 6/26/2009. These are the only harnesses recalled. |
| Recall Number | 10042 |
| Manufacturers › Name | Gorilla Inc., of Flushing, Mich. |
| Consumer Contact | For additional information, contact Gorilla Inc. at (877) 685-7817 between 9 a.m. and 4:30 p.m. ET Monday through Friday or visit the firm's Web site at www.gorillatreestands.com. Consumers can also write to the firm at Gorilla, Inc., P.O. 378, Flushing, MI., 48433 or 3475 Eastman Drive, Flushing, MI. 48433. |
| Last Publish Date | 2014-05-23T00:00:00 |
| Manufacturer Countries › Country | Philippines |