Hair Entrapment Danger In Whirlpool Bath Suction Covers
USHair Entrapment Danger In Whirlpool Bath Suction Covers
Recalling Firm: HydraBaths
Description du produit & Identification
TranslatedAugust 24, 1994 Release # 94-120 Washington, DC -- CPSC, HydraBaths Inc. of Santa Ana, Calif., is voluntarily recalling its model 20313X, 2031XX, and 203 whirlpool bath suction covers. These covers were manufactured prior to implementation of voluntary industry standards in 1985. HydraBaths estimates that there are about 40,000 whirlpool baths in use that have these suction covers.Whirlpool baths typically have one or two suction openings to draw in and circulate water. Each suction opening should have a cover designed to protect against entrapment of the bather's body parts and hair due to high suction forces. The recalled suction covers, which were not designed with such protection, may entangle a bather's hair into the openings, causing the bather's head to be held under water, which can result in drowning.To date, HydraBaths received two reports of hair entrapments. One entrapment resulted in a drowning death and the other was a near drowning.The recalled round covers can be identified by holes that are slotted or square shaped and larger than 1/8 inch. There are no visible markings on the covers that tell which model they are. The recalled covers were sold nationally before 1985 (as a component on whirlpool baths) to bathtub manufacturers, plumbing wholesalers, and distributors.HydraBaths suction covers distributed after 1985 are not involved in this recall and can be identified by the visible markings HB-8, SC-1, or SC-4 on the cover and by holes that are circular and 1/8 inch or smaller.HydraBaths and CPSC advise consumers to stop using whirlpools with the recalled suction covers. HydraBaths will send you free replacement suction covers. Call them at (714) 556-9133 or write them at HydraBaths, Recall Department, 2100 S. Fairview, Santa Ana, CA 92704 for free replacement suction covers.Consumers who are unsure if they have a recalled suction cover can call or write HydraBaths to help make that determination. Consumers who write should enclose a photo of their cover
Produits concernés
TranslatedHydraBath whirlpool bath suction covers
Additional Source Details
| Field | Value |
|---|---|
| U R L | https://www.cpsc.gov/Recalls/1994/Hair-Entrapment-Danger-In-Whirlpool-Bath-Suction-Covers |
| Title | Hair Entrapment Danger In Whirlpool Bath Suction Covers |
| Products › Name | HydraBath whirlpool bath suction covers |
| Products › Type | Baths & Bath Accessories |
| Products › Category I D | 1844 |
| Recall I D | 5571 |
| Recall Date | 1994-08-24T00:00:00 |
| Description | August 24, 1994 Release # 94-120 Washington, DC -- CPSC, HydraBaths Inc. of Santa Ana, Calif., is voluntarily recalling its model 20313X, 2031XX, and 203 whirlpool bath suction covers. These covers were manufactured prior to implementation of voluntary industry standards in 1985. HydraBaths estimates that there are about 40,000 whirlpool baths in use that have these suction covers.Whirlpool baths typically have one or two suction openings to draw in and circulate water. Each suction opening should have a cover designed to protect against entrapment of the bather's body parts and hair due to high suction forces. The recalled suction covers, which were not designed with such protection, may entangle a bather's hair into the openings, causing the bather's head to be held under water, which can result in drowning.To date, HydraBaths received two reports of hair entrapments. One entrapment resulted in a drowning death and the other was a near drowning.The recalled round covers can be identified by holes that are slotted or square shaped and larger than 1/8 inch. There are no visible markings on the covers that tell which model they are. The recalled covers were sold nationally before 1985 (as a component on whirlpool baths) to bathtub manufacturers, plumbing wholesalers, and distributors.HydraBaths suction covers distributed after 1985 are not involved in this recall and can be identified by the visible markings HB-8, SC-1, or SC-4 on the cover and by holes that are circular and 1/8 inch or smaller.HydraBaths and CPSC advise consumers to stop using whirlpools with the recalled suction covers. HydraBaths will send you free replacement suction covers. Call them at (714) 556-9133 or write them at HydraBaths, Recall Department, 2100 S. Fairview, Santa Ana, CA 92704 for free replacement suction covers.Consumers who are unsure if they have a recalled suction cover can call or write HydraBaths to help make that determination. Consumers who write should enclose a photo of their cover |
| Recall Number | 94120 |
| Manufacturers › Name | HydraBaths |
| Last Publish Date | 2015-02-18T00:00:00 |
Consumer Action Protocol: What You Should Do Immediately
Safety StepsCheck the model number, serial number, and date stamp on the rating label on the back or underside of the product.
Immediately discontinue using the product. Unplug electrical items and keep juvenile items out of reach of children.
Under statutory consumer protection rules, consumers are entitled to a full refund, certified replacement, or free repair kit without needing the original sales receipt.
If you suffered an injury, illness, or property damage from this product, file an official incident report with regulatory authorities (CPSC).
Your Legal Rights as a Consumer
Recalls are legally binding corrective safety actions overseen by statutory government bodies. Recalling entities are legally prohibited from charging consumers for official safety remedies. If a retailer or dealership refuses your recall remedy, notify the issuing regulatory agency immediately.
Frequently Asked Questions About This Recall
FAQ GuideQ1:What should I do immediately if I own or bought Hair Entrapment Danger In Whirlpool Bath Suction Covers?
Immediately stop using the product and keep it out of reach of children. Disconnect power if electrical, and do not attempt makeshift home repairs.
Q2:Can I get a full refund or free repair for this recall?
Yes. Recalling manufacturers and retail merchants are required under consumer protection regulations to offer a statutory remedy—typically a full refund, certified repair kit, or replacement unit.
Q3:Do I need my original sales receipt to claim a remedy or refund?
In most recall cases, no receipt is required. Because safety recalls are matters of public health and statutory compliance, retailers and manufacturers routinely issue refunds, store credit, or replacement kits upon presentation of the affected product or lot code.
Q4:Where can I verify official information for this safety alert?
This safety alert is aggregated directly from official regulatory agency records (CPSC). You can click the 'Official Agency Alert' link on this page to view the primary government notice and contact the manufacturer directly.
Vérifiez les autres produits de votre foyer
Outils gratuitsSafety recalls are issued daily across foods, medications, vehicles, and electronics. Use our instant tools to check your home for active safety warnings:
Aperçu
- Entreprise responsableHydraBaths
📢 Partager l’alerte
Alert family and friends to keep them safe. Copy this quick alert message:
🚨 SAFETY ALERT: HydraBaths - Hair Entrapment Danger In Whirlpool Bath Suction Covers Check if your household is affected: https://therecallfile.com/fr/recalls/hair-entrapment-danger-in-whirlpool-bath-suction-covers/CPSC-94120
Rejoindre la liste d’alerte
Recevez des alertes e-mail instantanées dès qu’un rappel critique est publié.
Support The Recall File
Help keep official recall alerts free, accessible, and fast for everyone.
Rappels associés
Health CanadaTransport Canada Recall - 2018088 -
Transport Canada Recall - 2018088 -
Tires
Health CanadaTransport Canada Recall - 2018288 -
Transport Canada Recall - 2018288 -
Airbag
Health CanadaTransport Canada Recall - 2018409 -
Transport Canada Recall - 2018409 -
Airbag