CPSCGeneral Alert

Plastic Table Lamps Warning

Veröffentlicht: 3. Dezember 1981Rückruf-ID: 81029Kategorie: VerbraucherprodukteLand: Vereinigte Staaten
US
Safety AlertCPSCUSUS

Plastic Table Lamps Warning

Recalling Firm: B & D Molded Products, Injection Corporation, A-Bee Syndicate

🌐
Mitteilung übersetzenTranslate notice text, hazard warnings, and descriptions into any supported language.

Produktbeschreibung & Identifikation

Plastic Table Lamps Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 3, 1981 Release # 81-029 Consumers Warned That Four Million Plastic Lamps May Pose Electrocution Hazard WASHINGTON, D.C. ( Dec. 3 ) -- Three firms today alerted consumers that approximately four million plastic table lamps if misused or carelessly handled may pose a risk of eIectrocution or electrical shock. The warning was issued voluntarily in cooperation with the U.S. Consumer Product Safety Commission by A-Bee Syndicate, Inc., of New York, New York; B & D Molded Products, Inc., of Shelton, Connecticut; and Injection Corporation, of Plainfield, New Jersey. CPSC staff has identified these companies as manufacturers and distributors of the lamps according to definitions in the Consumer Product Safety Act. According to the firms, the lamps were designed and manufactured in conformity with existing industry practices. They could, however, pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket. The lamps consist of a black plastic base with three legs which supports a plastic shade covered with bubble-like protrusions. The shades were produced in three colors: white, lime-green and neon-orange. The lamps stand approximately 16 inches tall, and some were made with the name "A-Bee" on the smooth collar at the base of the shade. The lamps were sold nationwide for approximately $1 each in variety retail stores from 1965 through 1975, although the majority were distributed in the eastern half of the U.S. Some lamps may have been given away as promotional items. Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: Unplug the lamp; Remove the shade and turn the lamp upside down; Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals. Anyone requiring additional information about this warning should contact CPSC's toll-free Hotline at 800-638-2772. Warning Certain of the pictured table lamps may contain a potential electrocution or shock hazard. Each lamp consists of a black, plastic three-legged base supporting a plastic shade covered with bubble-like protrusions. The shades are available in white, neon-orange, and lime-green. The lamps were distributed from 1965 through April 1975 and sold for approximately $1.00. The lamps may often be identified through the name "A-BEE" which may be visible on the smooth collar on the base of the lamp's shade. If the lamp is titled or tipped, the bulb socket may dislodge from the lamp's base, thereby exposing two copper electrical terminals. Consumers should check to see if their lamp is one affected by talking the following steps: Unplug the Lamp Remove the shade from the lamp's base Turn the lamp upside down If a bulb socket works itself loose or falls out exposing the electrical terminals, the lamp should not be used. In certain of the affected table lamps, the bulb socket may not be securely fastened to the lamp's base or may have been able to work itself loose from the lamp's base. Consumers owning one of the affected lamps are warned to immediately stop use of the lamp and remove it form children's access.

Betroffene Produkte

A-Bee lamps

Additional Source Details

FieldValue
U R Lhttps://www.cpsc.gov/Recalls/1981/Consumers-Warned-That-Four-Million-Plastic-Lamps-May-Pose-Electrocution-Hazard
TitlePlastic Table Lamps Warning
Products › NameA-Bee lamps
Products › TypeLamps
Products › Category I D2025
Recall I D4125
Recall Date1981-12-03T00:00:00
DescriptionPlastic Table Lamps Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 3, 1981 Release # 81-029 Consumers Warned That Four Million Plastic Lamps May Pose Electrocution Hazard WASHINGTON, D.C. ( Dec. 3 ) -- Three firms today alerted consumers that approximately four million plastic table lamps if misused or carelessly handled may pose a risk of eIectrocution or electrical shock. The warning was issued voluntarily in cooperation with the U.S. Consumer Product Safety Commission by A-Bee Syndicate, Inc., of New York, New York; B & D Molded Products, Inc., of Shelton, Connecticut; and Injection Corporation, of Plainfield, New Jersey. CPSC staff has identified these companies as manufacturers and distributors of the lamps according to definitions in the Consumer Product Safety Act. According to the firms, the lamps were designed and manufactured in conformity with existing industry practices. They could, however, pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket. The lamps consist of a black plastic base with three legs which supports a plastic shade covered with bubble-like protrusions. The shades were produced in three colors: white, lime-green and neon-orange. The lamps stand approximately 16 inches tall, and some were made with the name "A-Bee" on the smooth collar at the base of the shade. The lamps were sold nationwide for approximately $1 each in variety retail stores from 1965 through 1975, although the majority were distributed in the eastern half of the U.S. Some lamps may have been given away as promotional items. Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: Unplug the lamp; Remove the shade and turn the lamp upside down; Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals. Anyone requiring additional information about this warning should contact CPSC's toll-free Hotline at 800-638-2772. Warning Certain of the pictured table lamps may contain a potential electrocution or shock hazard. Each lamp consists of a black, plastic three-legged base supporting a plastic shade covered with bubble-like protrusions. The shades are available in white, neon-orange, and lime-green. The lamps were distributed from 1965 through April 1975 and sold for approximately $1.00. The lamps may often be identified through the name "A-BEE" which may be visible on the smooth collar on the base of the lamp's shade. If the lamp is titled or tipped, the bulb socket may dislodge from the lamp's base, thereby exposing two copper electrical terminals. Consumers should check to see if their lamp is one affected by talking the following steps: Unplug the Lamp Remove the shade from the lamp's base Turn the lamp upside down If a bulb socket works itself loose or falls out exposing the electrical terminals, the lamp should not be used. In certain of the affected table lamps, the bulb socket may not be securely fastened to the lamp's base or may have been able to work itself loose from the lamp's base. Consumers owning one of the affected lamps are warned to immediately stop use of the lamp and remove it form children's access.
Recall Number81029
Manufacturers › 1 › NameB & D Molded Products
Manufacturers › 2 › NameInjection Corporation
Manufacturers › 3 › NameA-Bee Syndicate
Last Publish Date2014-12-18T00:00:00

Consumer Action Protocol: What You Should Do Immediately

Safety Steps
1Verify Product Identifiers

Check the model number, serial number, and date stamp on the rating label on the back or underside of the product.

2Isolate & Discontinue Use

Immediately discontinue using the product. Unplug electrical items and keep juvenile items out of reach of children.

3Claim Free Statutory Remedy

Under statutory consumer protection rules, consumers are entitled to a full refund, certified replacement, or free repair kit without needing the original sales receipt.

4Report Adverse Incidents

If you suffered an injury, illness, or property damage from this product, file an official incident report with regulatory authorities (CPSC).

Your Legal Rights as a Consumer

Recalls are legally binding corrective safety actions overseen by statutory government bodies. Recalling entities are legally prohibited from charging consumers for official safety remedies. If a retailer or dealership refuses your recall remedy, notify the issuing regulatory agency immediately.

Frequently Asked Questions About This Recall

FAQ Guide

Q1:What should I do immediately if I own or bought Plastic Table Lamps Warning?

Immediately stop using the product and keep it out of reach of children. Disconnect power if electrical, and do not attempt makeshift home repairs.

Q2:Can I get a full refund or free repair for this recall?

Yes. Recalling manufacturers and retail merchants are required under consumer protection regulations to offer a statutory remedy—typically a full refund, certified repair kit, or replacement unit.

Q3:Do I need my original sales receipt to claim a remedy or refund?

In most recall cases, no receipt is required. Because safety recalls are matters of public health and statutory compliance, retailers and manufacturers routinely issue refunds, store credit, or replacement kits upon presentation of the affected product or lot code.

Q4:Where can I verify official information for this safety alert?

This safety alert is aggregated directly from official regulatory agency records (CPSC). You can click the 'Official Agency Alert' link on this page to view the primary government notice and contact the manufacturer directly.

Prüfen Sie weitere Produkte in Ihrem Haushalt

Kostenlose Tools

Safety recalls are issued daily across foods, medications, vehicles, and electronics. Use our instant tools to check your home for active safety warnings:

Übersicht

  • Rückrufendes UnternehmenB & D Molded Products, Injection Corporation, A-Bee Syndicate
Recall Hazard Severity
Caution (Class III)
Offizielle Behördenwarnung

📢 Warnung teilen

Alert family and friends to keep them safe. Copy this quick alert message:

🚨 SAFETY ALERT: B & D Molded Products, Injection Corporation, A-Bee Syndicate - Plastic Table Lamps Warning

Check if your household is affected:
https://therecallfile.com/de/recalls/plastic-table-lamps-warning/CPSC-81029
WhatsAppFacebook

Alarm-Liste abonnieren

Erhalten Sie sofortige E-Mail-Benachrichtigungen bei kritischen Produktrückrufen.

Support The Recall File

Help keep official recall alerts free, accessible, and fast for everyone.

Donate with PayPal

Supports USD, EUR, GBP, International Cards & PayPal

Spread the WordPlastic Table Lamps Warning

Install The Recall File App

Check safety warnings, scan your pantry, and monitor your vehicles directly from your home screen.