J.C. Penney Conducts Repair Program For Bench Grinders
USJ.C. Penney Conducts Repair Program For Bench Grinders
Recalling Firm: JC Penney
Grund für den Rückruf / Gefahr
TranslatedElectrocution/Electric Shock
Produktbeschreibung & Identifikation
TranslatedSeptember 28, 1978 Release # 78-079 J.C. Penney Conducts Repair Program For Bench Grinders WASHINGTON, D.C. (Sept. 28) -- The J.C. Penney Company, Inc., in cooperation with the U.S. Consumer Product Safety Commission (CPSC) and McGraw-Edison Co., has announced a voluntary repair program of about 2,700 J.C. Penney six-inch bench grinders that may pose an electric shock hazard. The model 4030 grinders were sold by J.C. Penney between June 1973 and approximately June 1975. A protective sleeve that insulates a lead wire may wear through if in contact with the motor shaft. Severe shock could result if the bench grinder is not properly grounded, and the user is grounded or touching a grounded metal object such as a water pipe. The repair program applies only to model 4030 grinders purchased after June 1973 which are not imprinted with a three-digit date code (such as 57C) on the nameplate. The bench grinder should not be used until it has been inspected and reworked. Owners of the bench grinders should contact their local J.C. Penney store to make free inspection and repair arrangements. A repair program that included the J.C. Penney grinders was first announced by the McGraw-Edison Co. and CPSC on August 29,1978. To verify the model number, call CPSC's toll-free Hotline at 800/638-2772
Betroffene Produkte
TranslatedJC Penney six-inch bench grinders
Additional Source Details
| Field | Value |
|---|---|
| U R L | https://www.cpsc.gov/Recalls/1978/JC-Penney-Conducts-Repair-Program-For-Bench-Grinders |
| Title | J.C. Penney Conducts Repair Program For Bench Grinders |
| Hazards › Name | Electrocution/Electric Shock |
| Products › Name | JC Penney six-inch bench grinders |
| Products › Type | Sanders/Grinders & Accessories |
| Products › Category I D | 2110 |
| Recall I D | 3948 |
| Recall Date | 1978-09-28T00:00:00 |
| Description | September 28, 1978 Release # 78-079 J.C. Penney Conducts Repair Program For Bench Grinders WASHINGTON, D.C. (Sept. 28) -- The J.C. Penney Company, Inc., in cooperation with the U.S. Consumer Product Safety Commission (CPSC) and McGraw-Edison Co., has announced a voluntary repair program of about 2,700 J.C. Penney six-inch bench grinders that may pose an electric shock hazard. The model 4030 grinders were sold by J.C. Penney between June 1973 and approximately June 1975. A protective sleeve that insulates a lead wire may wear through if in contact with the motor shaft. Severe shock could result if the bench grinder is not properly grounded, and the user is grounded or touching a grounded metal object such as a water pipe. The repair program applies only to model 4030 grinders purchased after June 1973 which are not imprinted with a three-digit date code (such as 57C) on the nameplate. The bench grinder should not be used until it has been inspected and reworked. Owners of the bench grinders should contact their local J.C. Penney store to make free inspection and repair arrangements. A repair program that included the J.C. Penney grinders was first announced by the McGraw-Edison Co. and CPSC on August 29,1978. To verify the model number, call CPSC's toll-free Hotline at 800/638-2772 |
| Recall Number | 78079 |
| Manufacturers › Name | JC Penney |
| Last Publish Date | 2014-12-17T00:00:00 |
Consumer Action Protocol: What You Should Do Immediately
Safety StepsCheck the model number, serial number, and date stamp on the rating label on the back or underside of the product.
Immediately discontinue using the product. Unplug electrical items and keep juvenile items out of reach of children.
Under statutory consumer protection rules, consumers are entitled to a full refund, certified replacement, or free repair kit without needing the original sales receipt.
If you suffered an injury, illness, or property damage from this product, file an official incident report with regulatory authorities (CPSC).
Your Legal Rights as a Consumer
Recalls are legally binding corrective safety actions overseen by statutory government bodies. Recalling entities are legally prohibited from charging consumers for official safety remedies. If a retailer or dealership refuses your recall remedy, notify the issuing regulatory agency immediately.
Frequently Asked Questions About This Recall
FAQ GuideQ1:What should I do immediately if I own or bought J.C. Penney Conducts Repair Program For Bench Grinders?
Immediately stop using the product and keep it out of reach of children. Disconnect power if electrical, and do not attempt makeshift home repairs.
Q2:Can I get a full refund or free repair for this recall?
Yes. Recalling manufacturers and retail merchants are required under consumer protection regulations to offer a statutory remedy—typically a full refund, certified repair kit, or replacement unit.
Q3:Do I need my original sales receipt to claim a remedy or refund?
In most recall cases, no receipt is required. Because safety recalls are matters of public health and statutory compliance, retailers and manufacturers routinely issue refunds, store credit, or replacement kits upon presentation of the affected product or lot code.
Q4:Where can I verify official information for this safety alert?
This safety alert is aggregated directly from official regulatory agency records (CPSC). You can click the 'Official Agency Alert' link on this page to view the primary government notice and contact the manufacturer directly.
Prüfen Sie weitere Produkte in Ihrem Haushalt
Kostenlose ToolsSafety recalls are issued daily across foods, medications, vehicles, and electronics. Use our instant tools to check your home for active safety warnings:
Übersicht
- Rückrufendes UnternehmenJC Penney
📢 Warnung teilen
Alert family and friends to keep them safe. Copy this quick alert message:
🚨 SAFETY ALERT: JC Penney - J.C. Penney Conducts Repair Program For Bench Grinders Check if your household is affected: https://therecallfile.com/de/recalls/j-c-penney-conducts-repair-program-for-bench-grinders/CPSC-78079
Alarm-Liste abonnieren
Erhalten Sie sofortige E-Mail-Benachrichtigungen bei kritischen Produktrückrufen.
Support The Recall File
Help keep official recall alerts free, accessible, and fast for everyone.
Ähnliche Rückrufe
Health CanadaTransport Canada Recall - 2018088 -
Transport Canada Recall - 2018088 -
Tires
Health CanadaTransport Canada Recall - 2018288 -
Transport Canada Recall - 2018288 -
Airbag
Health CanadaTransport Canada Recall - 2018409 -
Transport Canada Recall - 2018409 -
Airbag