Medizinprodukte Recalls
Defective surgical instruments, diagnostic equipment, and health device recalls.
UKField Safety Notices: 9 - 13 March 2026
Field Safety Notices: 9 - 13 March 2026
A list of Field Safety Notice for 9 - 13 March 2026...
FDA DevicesGEM Premier 5000; Model No. 00055430010.
GEM Premier 5000; Model No. 00055430010.
Confirmed customer complaints indicating that GEM PAKs (cartridges) for the GEM Premier 5000 may experience an increased incidence of Process Control Solution Not Detected (PCSND) errors during warm-up, including consecutive occurrences, resulting in GEM PAK ejection and requiring insertion of a new GEM PAK. iQM2 is an active quality process control program designed to provide continuous monitoring of the entire testing process. Thus, if a GEM PAK completes AutoPAK Validation following warm-up, it may remain in use. Consecutive GEM PAK ejections during warm-up may prolong turnaround times, potentially delaying results. In such cases, patient management may require reassessment once results are available. While many GEM PAKs continue to perform as intended, consecutive ejections may increase the likelihood of operational disruption, highlighting the importance of advance planning where feasible to help minimize impact.
FDA DevicesRaz-AT (Attendant Tilt) Mobile Shower Commode Chair, Catalog Number Z300 UDI-DI code: (01)00628758003007 Raz-ART (Attendant Rotational Tilt) Mobile Shower Commode Chair, Catalog Number Z333 UDI-DI code: (01)00628758003335 Raz-AT600 (Bariatric Tilt) Mobile Shower Commode Chair, Catalog Number Z360 UDI-DI code: (01)00628758003601 Raz-SP (Self Propel) Mobile Shower Commode Chair, Catalog Number Z200 UDI-DI code: (01)00628758001003 Raz-AP (Attendant Propel) Mobile Shower Commode Chair, Catalog Number Z100 UDI-DI code: (01)00628758001003 The Raz Mobile Shower Commode Chair is intended to be used by people with mobility impairments, who may have difficulty in standing or keeping their balance while completing activities such as showering, toileting, or personal hygiene.
Raz-AT (Attendant Tilt) Mobile Shower Commode Chair, Catalog Number Z300 UDI-DI code: (01)00628758003007 Raz-ART (Attendant Rotational Tilt) Mobile Shower Commode Chair, Catalog Number Z333 UDI-DI code: (01)00628758003335 Raz-AT600 (Bariatric Tilt) Mobile Shower Commode Chair, Catalog Number Z360 UDI-DI code: (01)00628758003601 Raz-SP (Self Propel) Mobile Shower Commode Chair, Catalog Number Z200 UDI-DI code: (01)00628758001003 Raz-AP (Attendant Propel) Mobile Shower Commode Chair, Catalog Number Z100 UDI-DI code: (01)00628758001003 The Raz Mobile Shower Commode Chair is intended to be used by people with mobility impairments, who may have difficulty in standing or keeping their balance while completing activities such as showering, toileting, or personal hygiene.
Due to a modification by a vendor and may be reinstalled without properly engaging the outside rear seat brackets that are used to keep the seat in place.
FDA DevicesEndo-Model Replacement Plateau; Item Number: 15-0027/16;
Endo-Model Replacement Plateau; Item Number: 15-0027/16;
The potential for an implant with a plateau screw where the bushing could detach from the screw shaft due to a longitudinal fracture.
FDA DevicesBrand Name: Equinoxe Ergo Product Name: Ergo Modular Impactor Handle Model/Catalog Number: 321-09-05
Brand Name: Equinoxe Ergo Product Name: Ergo Modular Impactor Handle Model/Catalog Number: 321-09-05
Impactor handle may be missing cross-pin
FDA DevicesEndo-Model Replacement Plateau; Item Number: 15-8521/11;
Endo-Model Replacement Plateau; Item Number: 15-8521/11;
The potential for an implant with a plateau screw where the bushing could detach from the screw shaft due to a longitudinal fracture.
FDA DevicesBrand Name: APTUS Product Name: 2.5 TriLock Screw 16mm, HD7, 1/Pkg Model/Catalog Number: A-5750.16/1 Software Version: Not applicable. Product Description: The APTUS fixation systems are used for fractures, osteotomies and arthrodesis of the hand, forearm, shoulder and foot. Component: Not applicable.
Brand Name: APTUS Product Name: 2.5 TriLock Screw 16mm, HD7, 1/Pkg Model/Catalog Number: A-5750.16/1 Software Version: Not applicable. Product Description: The APTUS fixation systems are used for fractures, osteotomies and arthrodesis of the hand, forearm, shoulder and foot. Component: Not applicable.
Mix up between specified lots of 2.5mm and 2.8mm outer diameter screws.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 390010-1, 390010-X, 390010-2
Penner Pacific Bathing Spa, Model Numbers 390010-1, 390010-X, 390010-2
The device does not bear a unique device identifier.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 360020-1EP
Penner Pacific Bathing Spa, Model Numbers 360020-1EP
The device does not bear a unique device identifier.
FDA DevicesBrand Name: APTUS Product Name: 2.8 TriLock Screw 16mm, HD7, 1/Pkg Model/Catalog Number: A-5850.16/1 Software Version: Not applicable. Product Description: The APTUS fixation systems are used for fractures, osteotomies and arthrodesis of the hand, forearm, shoulder and foot. Component: Not applicable.
Brand Name: APTUS Product Name: 2.8 TriLock Screw 16mm, HD7, 1/Pkg Model/Catalog Number: A-5850.16/1 Software Version: Not applicable. Product Description: The APTUS fixation systems are used for fractures, osteotomies and arthrodesis of the hand, forearm, shoulder and foot. Component: Not applicable.
Mix up between specified lots of 2.5mm and 2.8mm outer diameter screws.
FDA DevicesEndo-Model SL Connection Component incl. PE-Plateau; Item Number: 16-2840/02;
Endo-Model SL Connection Component incl. PE-Plateau; Item Number: 16-2840/02;
The potential for an implant with a plateau screw where the bushing could detach from the screw shaft due to a longitudinal fracture.
FDA DevicesGEM Premier 5000 PAK; Part No. 00055415004.
GEM Premier 5000 PAK; Part No. 00055415004.
Confirmed customer complaints indicating that GEM PAKs (cartridges) for the GEM Premier 5000 may experience an increased incidence of Process Control Solution Not Detected (PCSND) errors during warm-up, including consecutive occurrences, resulting in GEM PAK ejection and requiring insertion of a new GEM PAK. iQM2 is an active quality process control program designed to provide continuous monitoring of the entire testing process. Thus, if a GEM PAK completes AutoPAK Validation following warm-up, it may remain in use. Consecutive GEM PAK ejections during warm-up may prolong turnaround times, potentially delaying results. In such cases, patient management may require reassessment once results are available. While many GEM PAKs continue to perform as intended, consecutive ejections may increase the likelihood of operational disruption, highlighting the importance of advance planning where feasible to help minimize impact.
FDA DevicesCLARITY II Laser System; Model No. 1110200210.
CLARITY II Laser System; Model No. 1110200210.
Reports of devices sparking/popping and potentially burning patients.
FDA DevicesEndo-Model Replacement Plateau; Item Number: 15-2836/11;
Endo-Model Replacement Plateau; Item Number: 15-2836/11;
The potential for an implant with a plateau screw where the bushing could detach from the screw shaft due to a longitudinal fracture.
FDA DevicesGEM Premier 5000; Part No. 00055430011.
GEM Premier 5000; Part No. 00055430011.
Confirmed customer complaints indicating that GEM PAKs (cartridges) for the GEM Premier 5000 may experience an increased incidence of Process Control Solution Not Detected (PCSND) errors during warm-up, including consecutive occurrences, resulting in GEM PAK ejection and requiring insertion of a new GEM PAK. iQM2 is an active quality process control program designed to provide continuous monitoring of the entire testing process. Thus, if a GEM PAK completes AutoPAK Validation following warm-up, it may remain in use. Consecutive GEM PAK ejections during warm-up may prolong turnaround times, potentially delaying results. In such cases, patient management may require reassessment once results are available. While many GEM PAKs continue to perform as intended, consecutive ejections may increase the likelihood of operational disruption, highlighting the importance of advance planning where feasible to help minimize impact.
FDA DevicesEndo-Model Replacement Plateau; Item Number: 15-2835/12;
Endo-Model Replacement Plateau; Item Number: 15-2835/12;
The potential for an implant with a plateau screw where the bushing could detach from the screw shaft due to a longitudinal fracture.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 350010-1, 350000-2, 350010-X
Penner Pacific Bathing Spa, Model Numbers 350010-1, 350000-2, 350010-X
The device does not bear a unique device identifier.
FDA DevicesGEM Premier 5000; Part No: 00055415011.
GEM Premier 5000; Part No: 00055415011.
Confirmed customer complaints indicating that GEM PAKs (cartridges) for the GEM Premier 5000 may experience an increased incidence of Process Control Solution Not Detected (PCSND) errors during warm-up, including consecutive occurrences, resulting in GEM PAK ejection and requiring insertion of a new GEM PAK. iQM2 is an active quality process control program designed to provide continuous monitoring of the entire testing process. Thus, if a GEM PAK completes AutoPAK Validation following warm-up, it may remain in use. Consecutive GEM PAK ejections during warm-up may prolong turnaround times, potentially delaying results. In such cases, patient management may require reassessment once results are available. While many GEM PAKs continue to perform as intended, consecutive ejections may increase the likelihood of operational disruption, highlighting the importance of advance planning where feasible to help minimize impact.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 860010-1L
Penner Pacific Bathing Spa, Model Numbers 860010-1L
The device does not bear a unique device identifier.
FDA DevicesEndo-Model Replacement Plateau; Item Number: 15-0027/15;
Endo-Model Replacement Plateau; Item Number: 15-0027/15;
The potential for an implant with a plateau screw where the bushing could detach from the screw shaft due to a longitudinal fracture.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 360010-2WT, 360010-1, 370000-1W, 360010-1WT, 362010-1, 370000-1WL, 360010-1L, 360010-1W, 360010-XWTL, 370000-XWL, 360010-1WTL, 360010-XWT, 360010-2, 370000-2W, 360010-2L, 370000-2WL, 360010-X, 370000-XW, 360010-2W, 362010-2, 360010, 37000-XWL, 362010-X, 362010-XL, 362010-1L, 360010-XL, 37000-1W, 360010-XW, 3700000-1W, 362010-2L, 36010-XWT, 370000-1L, 360010-2WT, 360000-1, 360010-XWSB, 360010-XLSB
Penner Pacific Bathing Spa, Model Numbers 360010-2WT, 360010-1, 370000-1W, 360010-1WT, 362010-1, 370000-1WL, 360010-1L, 360010-1W, 360010-XWTL, 370000-XWL, 360010-1WTL, 360010-XWT, 360010-2, 370000-2W, 360010-2L, 370000-2WL, 360010-X, 370000-XW, 360010-2W, 362010-2, 360010, 37000-XWL, 362010-X, 362010-XL, 362010-1L, 360010-XL, 37000-1W, 360010-XW, 3700000-1W, 362010-2L, 36010-XWT, 370000-1L, 360010-2WT, 360000-1, 360010-XWSB, 360010-XLSB
The device does not bear a unique device identifier.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 361910-1A, 361910-1A, 361910-XA, 361910-2I, 361910-1A, 361910-1, 361910-XI, 361910-1I, 361910-2A, 36191-1A, 361910-X
Penner Pacific Bathing Spa, Model Numbers 361910-1A, 361910-1A, 361910-XA, 361910-2I, 361910-1A, 361910-1, 361910-XI, 361910-1I, 361910-2A, 36191-1A, 361910-X
The device does not bear a unique device identifier.
FDA DevicesPenner Pacific Bathing Spa, Model Numbers 760010-1, 770010-1
Penner Pacific Bathing Spa, Model Numbers 760010-1, 770010-1
The device does not bear a unique device identifier.
FDA DevicesGEM Premier 5000; Part No. 00055430004.
GEM Premier 5000; Part No. 00055430004.
Confirmed customer complaints indicating that GEM PAKs (cartridges) for the GEM Premier 5000 may experience an increased incidence of Process Control Solution Not Detected (PCSND) errors during warm-up, including consecutive occurrences, resulting in GEM PAK ejection and requiring insertion of a new GEM PAK. iQM2 is an active quality process control program designed to provide continuous monitoring of the entire testing process. Thus, if a GEM PAK completes AutoPAK Validation following warm-up, it may remain in use. Consecutive GEM PAK ejections during warm-up may prolong turnaround times, potentially delaying results. In such cases, patient management may require reassessment once results are available. While many GEM PAKs continue to perform as intended, consecutive ejections may increase the likelihood of operational disruption, highlighting the importance of advance planning where feasible to help minimize impact.